You must first remove the meter faceplate. Then using small needle nose pliers or tweezers, lift the arm with the eyelet around the bulb soldered to it, and swing it out of the way. Carefully grasp the bulb, it will come straight up out of the large eyelet. The bulb will have a Teflon ring around it. Don't lose the insulating spacer. You can see from the drawing that the bulb leads are arranged so that one lead goes inside the Teflon ring, and one goes outside of it. Reverse the disassembly procedure and it should work.

We usually stock the light source lamps if you need more. Ours are aged and selected with cut and formed leads. Check our website under "replacement parts" for photos and current pricing on this and other parts in your transmitter.

[Prev]   [Next]

Copyright © 2001 by Astre Systems Inc. All rights reserved.